American Standard Advanced Clean 100 Serie Manuel De L'utilisateur page 51

Troubleshooting
Rear Washing, Rear Washing - Mild, and Front Washing (Continued)
Symptom
The water temperature is not set to
an appropriate temperature.
The nozzle spray
is not warm.
The water temperature is not set to
an appropriate temperature.
The nozzle spray
When purchasing a replacement model, the position that the spray
does not reach the
reaches may feel different due to changes in product design.
correct position. This is a feature of the product and is not a malfunction.
Nozzle spray is
The spray strength is low.
weak.
Nozzle is
The nozzle shutter has been
disconnected
brushed off during cleaning.
(hanging)
Nozzle cleaning
process does not
Water shutoff valve is closed.
operate.
Motor noise can
This is not a malfunction.
be heard when
This is the operation sound of the pump used to spray the nozzle water.
using the nozzle
The volume varies depending on the washing mode and spray strength.
spray.
The spray may
When purchasing a replacement model, the spray may feel stronger
be stronger or
or weaker compared to the product before replacement due to design
weaker than
changes.
models you have
This is a feature of the product and is not a malfunction.
used in the past.
Cause
Set the water temperature to an
appropriate temperature.
This is not a malfunction.
When water temperature drops,
such as in winter, spray strength
may weaken slightly.
Press the 【＋】 side of the [SPRAY
STRENGTH] button.
Attach the nozzle shutter correctly.
Turn the open/close knob 180°
counterclockwise.
Solution Page
9
ー
ー
14
47
7
ー
ー
48 - EN