American Standard Advanced Clean 100 Serie Manuel De L'utilisateur page 39

Cleaning and Maintenance
®
The SpaLet lid can be removed easily. This is convenient for washing hinges that are normally hidden and for full
cleaning of the lid.
Removing the SpaLet Lid
1 Disconnect the power plug from the outlet.
2 Hold the SpaLet lid with both hands and lift
it up so that the right side opens outwards,
and then remove from the pin hole.
SpaLet lid
② Open outward
3 Remove the SpaLet lid by lifting and
twisting to to the left.
SpaLet lid
② Move to the left
① Hold with
both hands
Pin hole
Pin
① Lift the SpaLet lid up
Assembling the SpaLet Lid
1 Align and insert the pin hole on the left
side of the SpaLet lid with the pin on the
left side of the SpaLet body.
* Align the SpaLet lid with the angle of the SpaLet
body pin to attach the SpaLet lid.
Pin hole
Pin
2 Open the pin hole on the right side of the
SpaLet lid outwards and then align the pin
with the pin hole to attach the SpaLet lid.
3 Connect the power plug to an outlet.
■ Reusing the SpaLet
Always perform the necessary preparations and
checks before use. ( ☞ Page 7)
[CAUTION]
● Make sure to disconnect the power plug before
removing the SpaLet lid.
* Failure to do so may damage internal parts.
● Do not apply excessive force to the SpaLet lid.
* Doing so may damage the part.
● Do not open the SpaLet seat while the SpaLet lid is
removed.
* Doing so could cause damage such as scratching
covers and the SpaLet seat.
● Do not use the SpaLet while the SpaLet lid is
removed.
SpaLet lid
① Open
② Attach
36 - EN