Useful Functions; Power Save - American Standard Advanced Clean 100 Serie Manuel De L'utilisateur

Useful Functions

The power save function includes the one-touch power save (8 hours) option and the advanced power save (always
on) option. Using one-touch power save together with advanced power save is even more effective at reducing energy
consumption. This function is turned off by default.
One-touch Power Save (8 Hours)
Press this switch when the SpaLet
seat heater for 8 hours and reduce power consumption. The previous settings will be restored after 8 hours elapse.
● Press the 【 Power Save 】 button.
* Each pressing of the 【Power Save】 button toggles
between the power-saving modes.
* The Power Save indicator in the LCD turns on when
the function is enabled.
Set
8:00 10:00 12:00 14:00 16:00 18:00 20:00
Temperature
Setting

Power Save

Temperature
OFF
Power save indicator
Off
(Reference)
● The one-touch power save setting is reset during a power outage or when the power plug has been disconnected from the outlet.
Advanced Power Save (Always On)
This function lowers the water temperature when the SpaLet is not in use to reduce power consumption.
* Power is saved at all times while the SpaLet is not in use.
● Press and hold both the 【 Power
Save 】 and 【 Nozzle Cleansing 】
buttons for at least 2 seconds.
* The power saving mode is changed each time the
【Power Save】 and 【Nozzle Cleansing】 buttons are
both pressed and held for at least 2 seconds.
* The Power Save indicator in the LCD flashes when
the function is enabled.
Set
Temperature
Setting
Power Save
Temperature
OFF
Power save indicator Off
(Reference)
● When the power save function is activated, the water temperature is lowered, which may feel cool to the touch. In
this case, cancel the power save function.
● Leaving the SpaLet seat lid closed is still an effective way to conserve power when the power save function is turned off.
21 - EN
®
will not be used for an extended period of time, such as at night, to turn off the SpaLet
Restoration
10:00
8 hours Standby
On Flashes On
In use
Restoration Power Save
Flashes twice
【 Power Save 】
* The one-touch power save option
can be activated twice per day.
* Once 8 hours elapse, the previous
settings are automatically restored,
and the Power Save indicator
begins to flash.
【 Power Save 】 + 【 Nozzle Cleansing 】
* When used in combination with the
one-touch power save option, the
Power Save indicator on the LCD
turns on while the one-touch power
save option is in effect for 8 hours.
The Power Save indicator flashes
twice during the 16 hours of one-
touch power save standby.
● Flush button indicator
Power save
indicator
(Illuminated)
● Flush button indicator
Power save
indicator
(flashes twice)