Specifications - American Standard Advanced Clean 100 Serie Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Specifications

Model Number
Rated Voltage/Frequency
Maximum Power Consumption
Required Minimum Pressure
Maximum Pressure
Operating Temperature Range
Product Dimensions
Product Weight
Power Cord
Flushing Water Volume
Water Supply System
Flushing Method
Water Supply System
Rear Washing Volume
Rear Washing - Mild Volume
Washing
Front Washing Volume
Heater Capacity
Safety System
Air Temperature
Warm Air
Drying
Heater Capacity
Safety System
Bowl
Sterilization
Room Refresh
Surface Temperature
Seat heating
Heater Capacity
Safety System
Deodorizing Method
Deodorizer
Deodorizing Capacity
Smart
Remote
Communication Protocol
Control Unit
At least 0.175 MPa /25 PSI (Hydrostatic Pressure) and 0.10 MPa /14.5 PSI (Flow Pressure)
375 mm (14-3/4") in width x 650 mm (25-1/16") in depth x 523 mm (20-9/16") in height
Approximately 34 kg/75 lbs (body: 12 kg/26.5 lbs, toilet bowl: 22 kg/48.5 lbs)
Rear washing: 0.43 L/min. (14.5 oz) when the water supply pressure is 0.2 MPa (29 PSI)
Rear washing - mild: 0.45 L/min. (15.2 oz) when the water supply pressure is 0.2 MPa (29 PSI)
Water temp.
Water temperature: Approx. 32 - 40°C (89.6 - 104°F) (6 levels of adjustability)
Temperature fuse, high-temperature detection thermistor, and flow rate sensor
Air Flow
Room temperature or approx. 40 - 55°C (104 - 131°F): (3 levels of adjustability)
Air Flow
System
Air Flow
Chemical absorption system with a deodorizer cartridge and decomposition and removal
System
Room temperature or approx. 28 - 36°C (82.4 - 96.8°F) (6 levels of adjustability)
Advanced power save is active: Room temperature or approx. 27 - 30°C (80.6 - 86°F)
Dimensions
Power
Display
297AA204 Combo
120 VAC at 60 Hz
and 17L/min. when flowing.
0.75 MPa/108.8 PSI (hydrostatic pressure)
0°C - 40°C (32°F - 104°F)
Effective Length: 1.0 m (39-3/8")
Full flush: 5.0 L/1.3 gal, Partial flush: 3.5 L/0.9 gal
Direct connection to water supply
Direct valve system
Direct connection to water supply
(Spray strength: 6 levels of adjustability via pulse method)
(Spray strength: 6 levels of adjustability via pulse method)
0.45 L/min. (15.2 oz) when the water supply pressure is 0.2 MPa (29 PSI)
(Spray strength: 6 levels of adjustability via pulse method)
3
0.30 m
/min. (10.6 ft
Temperature fuse
Exhaust and intake air flow: 0.04 m
Decomposition and removal using Plasmacluster technology (air recirculation)
Exhaust and intake air flow: 0.04 m
using Plasmacluster technology
One-touch power save: Room temperature
Temperature fuse
Chemical absorption system with a deodorizer cartridge
Exhaust and intake air flow: 0.04 m
W 239 mm (9-7/16") x D 29 mm (1-1/8") x H 45 mm (1-3/4")
AAA alkaline batteries: 2 Pieces
1300 W
1240 W
3
/min.)
500 W
/min. (1.4 ft
3
/min.).
3
3
/min. (1.4 ft
/min.)
3
48 W
3
/min. (1.4 ft
/min.)
3
Infrared
LCD
58 - EN

Publicité

Table des Matières
loading

Table des Matières