Night Light - American Standard Advanced Clean 100 Serie Manuel De L'utilisateur

Useful Functions

Night Light

The area at the base of the SpaLet and inside of the SpaLet
presence of someone. The lights automatically turn off once their presence is no longer detected.
This function is turned on by default.
● Press the 【 Light 】 button.
* Each pressing of the 【Light】 button will turn the
function on and off.
(Reference)
● Because this is a dim light, make sure the bathroom has a
main light installed.
● The night light can cause shadows to appear in the SpaLet
bowl, which may appear as waste. Turn off the night
light to check. If you do not like this operation, you can
configure the night light to only illuminate the area at the
base of the SpaLet.
● The blue light has priority when bowl cleaning is enabled.
Permanently Turning Off the
SpaLet Bowl Light
● Press and hold both the 【 Auto
Clean 】 and 【 Seat Temp. 】 buttons
for at least 2 seconds.
* The SpaLet will emit a short tone to indicate that
the setting has been changed.
* Repeat the procedure to reenable the light.
The SpaLet will emit a short tone to indicate that
the setting has been changed.
®
bowl are illuminated when the SpaLet detects the
【 Auto Clean 】 + 【 Seat Temp. 】
【 Light 】
22 - EN