Removing Nozzle Tips - American Standard Advanced Clean 100 Serie Manuel De L'utilisateur

Cleaning and Maintenance
NOTE: Removing Nozzle Tips
Both Front and Rear nozzles can be removed from the extended wands to additionally clean them. Follow
steps below.
a) With selected wand extended, turn nozzle head counterwise about 1/2 turn. (ref fig. a)
b) Carefully remove nozzle head from the extended wand to additionally clean. (ref. fig b)
c) Place nozzle head into extended wand in reverse order and turn clockwise about 1/2 turn.
A
B
C
5. Return the settings for Auto flush and Auto open/close. (Page 17, 18)
NOTES:
• Do not apply excessive force to the nozzles, as this may cause failure.
• Do not pull or push the nozzles. The nozzle will not be retracted and failure may occur.
If you pull or push the nozzles by mistake, turn off the power breaker or remove the power plug
from the outlet, then turn on the power breaker or connect the power plug after 10 seconds.
• Do not clean the nozzles with toothbrushes.
40 - EN