American Standard Advanced Clean 100 Serie Manuel De L'utilisateur page 35

Useful Information
Draining Water (Continued)
CAUTION
● Make sure to close the water
shutoff valve when removing
the strainer inside the water
OBSERVE
shutoff valve.
● Make sure to install the strainer
evenly on all sides.
● Check that there is no dirt
remaining on the O-ring before
installing the strainer.
* Check that the O-ring is free from
foreign materials as failure to do
so may result in water leakage and
flooding.
®
■ Reusing the SpaLet
Always perform the necessary preparations and
checks before use. ( ☞ Page 7)
■ Possibility of Freezing Water
● Drain the water in the SpaLet bowl and use
anti-freeze solution or a bath towel to plug
the drain outlet.
* Do not flush the anti-freeze solution. Collect the
anti-freeze solution and dispose appropriately.
Failure to dispose of anti-freeze solution
properly can affect the septic tank and pollute
the environment.
* Make sure to completely plug the drain outlet.
Failure to do so allows odors and insects to get
into the area.
● Water must be removed from the water supply
pipe. If you have a SpaLet bowl with a drain
valve, use the water drain plug in your building to
drain water from the water supply pipe in addition
to the previously described procedure.
( ☞ Page 31) Open the water shutoff valve after
manipulating the water drain plug.
32 - EN