Installation / Commissioning; Adjusting The Extraction Height - FLUX VISCOFLUX mobile S Notice D'instructions Originale

Loosen the screws with an Allen key,
shift the limit switch, retighten the
screws.
>
Other accessories:
We offer the appropriate accessories for your application, such as:
Conductive front castors, hose connections, hose clamps, hose pipes, hose sockets,
discharge spouts, retention brackets, spring balancers, solenoid valves.
You will find the precise specifications in our price list or on request.
4

Installation / Commissioning

4.1

Adjusting the extraction height

The extraction height of the lifting mast can be adjusted by moving the limit switch
The extraction height is factory-set to the value shown in dimension sheet (page 39).
Move the lifting sledge upwards and
>
remove the 3 screws (1).
Move the lifting sledge downwards
>
and remove the 2 screws (2) at the
top.
Remove the cable guide.
>
48 / 96
Changeable conditions e.g. different heights of pallets can affect the shut-
down.
Operating instructions VISCOFLUX mobile S
2
2
1