General Regulations And Notes; Safety Concept - FLUX VISCOFLUX mobile S Notice D'instructions Originale

There is a danger of crushing in the area of the pump and the rim of the drum
when lowering or lifting the follower plate.
 Small amounts of pumped material may get to the rear side of the follower
>
>
Information
For detailed information on the process device see the manufacturer's
operating instructions (part of the scope of delivery).
>
>
>
>
2.4

General regulations and notes

Information
The process device needs to be checked at regular intervals in accordance
with the statutory/country-specific regulations and accident prevention
regulations (in Germany e.g. BGV A1; DGUV Vorschrift 3).
2.5

Safety concept

The following safety objectives are pursued:
- Prevent injury to personnel.
- Prevent damage to and standstill of the mobile drum emptying system.
- Protect the environment.
To this end, the following measures have been taken:
-
Structural protective devices
o Free wheel of the lifting sledge when lifting the follower plate with compressed air.
o Slipping clutch on the drive shaft which prevents damage to the machine during low-
ering.
o Locking brakes at both swivel castors
-
Safety information at the device and in the Operating Instructions
The drum emptying system must be used by authorised personnel only.
plate past the sealing lip.
Material may continue to exit from the hose after the pump has been
switched off. Discharge of such material in such a way that neither
persons nor the environment are at hazard.
In order to avoid accidents, dispose of splashed medium in time and get
rid of it.
The drum emptying system must not be used to lift persons.
There must be no persons below the lifted follower plate.
While the drum emptying system is being operated, there must be
no persons or body parts near the rod.
When placing the drum emptying system please make sure that the
rod is lowered.
Operating instructions VISCOFLUX mobile S 37 / 96