Trolley-Mounted Pumps; Warnings; Start-Up; Maintenance - KSB AU Manuel D'instructions

9.2

Trolley-mounted pumps

9.2.1

Warnings

The instructions in this annex must be used along with the
corresponding pump instructions.
All the instructions in this manual should be followed,
especially those regarding operation safety and handling of
the equipment.
We reserve the right to make technological innovation
modifications.
9.2.2

Start-up

Before starting up the equipment, check that it is completely
stable and that the wheels are locked in place using locking
wedges. These locking wedges are not supplied by KSB ITUR
and should therefore be provided by the customer.
The surface upon which the wheels are placed must be flat,
non-sloping and clean in order to prevent any displacement.
If operation is by way of an electric motor with a pluggable
connection, check that the circuit breaker or operation selector
is in shutdown position before connecting to the grid.
The start-up instructions in the pump and motor manuals must
be followed.
9.2.3

Maintenance

Apart from the particular instructions on maintenance of the
pump and motor, it is only necessary to regularly check the
lubrication, and the state and correct attachment of the wheels
to the shaft.
9.2.4

Safety

All the instructions in the pump instructions manual
on safe operation and handling of the equipment
must be followed.
In particular, in order to prevent the equipment from moving
and creating a hazard, it should ALWAYS be positioned on a
flat, non-sloping surface, with locking wedges preventing any
movement.
AU
31