Form Of Construction; Forces And Moments Permitted In The Nozzles - KSB AU Manuel D'instructions

4.3

Form of construction

Pump casing with axial suction and radial discharge. Semi-
open single-stage impeller.
The monobloc (M) construction has a rigid coupling.
The non-monobloc construction has a flexible coupling.
4.4

Forces and moments permitted in the nozzles

FORCES
[N]
SIZE
Fx Fy
PUMP
AU-1,5
AU-2
AU-3
AU-50
330 300
AU-65 420 370
AU-80 500 450
AU-100 670 600
AU-150
1000 900
AU-200 1340 1200
(1) FOR NODULAR CAST, CARBON STEEL OR STAINLESS STEEL CASING, MULTIPLY THESE VALUES BY 2.0
6
CAST IRON OR BRONZE CASING (1)
SUCTION
MOMENTS
[N.m]
Fz Mx My
THREADED CONNECTIONS, DO NOT ADMIT STRESSES
270 280 200
340 300 220
410 320 230
540 350 250
810 500 350
1080 650 460
Bearings: The monobloc (M) construction does not have
friction bearings. The non-monobloc construction has oil or
grease lubricated bearings, depending on the size of the
pump.
Shaft sealing: Mechanical seal.
FORCES
[N]
Mz Fx Fy
230 300 270
240 370 340
260 450 410
290 600 540
410 900 810
530 1200 1080
DISCHARGE
MOMENTS
[N.m]
Fz Mx My
330 280 200
420 300 220
500 320 230
670 350 250
1000 500 350
1340 650 460
AU
Mz
230
240
260
290
410
530