Dibo JMB-S Mode D'emploi page 122

E N
O P E R AT I O N
2 C O N T R O L S C R E E N - T E M P E R AT U R E S E T T I N G
In this screen you can set the desired burner temperature. Move the control
stick upwards (raise temperature) or downwards (lower temperature) to set
the desired temperature. Increase/decrease can be done in steps of 5 °C.
Turn off the burner immediately: Move the control stick quickly up / down.
Minimum value 0 °C - Maximum set point: depending on the factory setting.
Operate to the left: return to the main screen (at each other screen, same
principle).
DiBO 26