Yamaha TT-R125Y 2009 Manuel D'atelier page 518

SWINGARM
REMOVAL POINTS
Bushing
1. Remove:
• Bushing 1
TIP
Remove the bushing by pressing.
INSPECTION
Wash the bushings, collars, and covers in a
solvent.
Swingarm
1. Inspect:
• Bushing 1
• Bushing 2
Damage/pitting → Replace bushings as a
set.
2. Inspect:
• Dust cover
Damage → Replace.
3. Inspect:
• Swingarm
Damage/bends/cracks → Replace.
Relay arm
1. Inspect:
• Collar 1
• Bushing 2
Damage/pitting → Replace collar and
bushing as a set.
• Bushing 3
• Bushing 4
Damage/pitting → Replace bushings as a
set.
• Collar 5
• Bushing 6
• Bushing 7
Damage/pitting → Replace collars and
bushing as a set.
2. Inspect:
• Oil seal 8
• Dust cover 9
Damage → Replace.
3. Inspect:
• Relay arm 0
Damage/bends/cracks → Replace.
5-60
CHAS