Publicité
1 Clamp
2 Clutch switch lead
3 Engine stop switch lead
4 Brake hose (Brake cable
for the TT-R125E)
5 Clutch cable
6 Throttle cable
7 Main switch lead
8 Start switch lead
8
F
CABLE ROUTING DIAGRAM
A Fasten the clutch switch lead and
engine stop switch lead to 3 clicks.
B Pass the brake hose (brake cable for
the TT-R125E) in front of the number
plate and through the cable guide.
C Pass the clutch cable in back of the
number plate.
D Starting at the forepart, pass the main
switch lead, clutch cable and start
switch lead in that order.
E Pass the start switch lead in back of
the starter cable.
F Pass the main switch lead on the
right of the number plate stay.
7
I
8
G
1
H
1
7
E
6
D
C
5
A
3
1
2-35
SPEC
G Fasten the throttle cable
adjuster cover and start switch
lead with a plastic locking tie
ends downward.
H Fasten the start switch lead to
3 clicks.
I Pass the start switch lead in
the middle of the brake master
cylinder bracket.
(TT-R125LWE only)
J Pass the engine stop switch
lead in the middle of the clutch
holder.
J
2
3
4
B
Publicité
Chapitres
