Cooking Information; Settings And Power Levels - Atag HI7071A Livret D'instructions

Plaque de cuisson à induction
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

cooking information

settings and power levels

power
The power can be set from 50 W to 3.2 kW (see table on
Page 17).
two zones
You will hear a ticking
Two cooking zones one in front of the other are operated by
sound if two cooking
one generator. The advantage of this is that a high power level
zones one in front of
can be realised for a cooking zone. This is ideal for bringing
the other are
food and liquids to the boil very quickly, for frying and for
switched on at the
searing large quantities.
When both of these cooking zones are switched on at the
same time. This is
same time, the power is automatically shared between them.
caused by the
Up to setting 10, this does not have any consequences.
appliance switching
If, however, you set one cooking zone to setting 11, 12
over from the rear
cooking zone to the
, the other cooking zone will automatically switch down to
front one and back
setting 6 or 7.
again.
Zones one in front of
the other affect each
other.
Two cooking zones alongside each other have no effect on
each other. So you can set them both to a high setting at the
same time.
Zones alongside
each other can
both be set to a
high setting at
the same time.
GB 20
getting used to it...
or
setting 12,
setting 11
wok setting
cooking information
settings and power levels
To start with, you will be surprised by the speed of the
appliance. In particular, bringing things to the boil on the
higher setting is very fast. To prevent a dish boiling over or
boiling dry, the best thing is to always stay beside the hob.
In the case of induction cooking, it is only the part of the
zone on which the pan stands that is used. If you use a small
pan on a large zone, the power will be adjusted to the
diameter of the pan. You achieve the best result by using a
pan that has the same dimensions as the cooking zone. The
power will thus be lower and it will take longer before the
food in the pan comes to the boil. If you use a pan with a
base that is too small, the cooking zone will not switch on.
The minimum pan base diameter is 12 cm.
or
Only switch the hob on at setting 12,
boil water. This setting is too high for heating butter or milk
and much too high for defrosting.
– Consult the cooking tables on pages 22 and 23 to help you
learn the techniques.
Setting 11 is the grill setting. This setting is suitable for
grilling meat. Setting 12 is far too fast for this; the milk
constituents in the margarine burn before the margarine has
melted.
Setting 11 is also the 'wok' pre-selected setting. The 'wok'
indicator light comes on. This only applies to the front right
cooking zone. Other settings or cooking zones, however, may
also be used. If, for example, you have a cast-iron wok with a
small base, and if space permits, the rear left cooking zone
may also be used.
or
if you want to
GB 21

Publicité

Table des Matières
loading

Table des Matières