Electronic Control Panel Operation; General Functions - Jacuzzi Luxury Serie Mode D'emploi

eLeCtrONiC CONtrOL PaNeL OPeratiON

(With optional Chromotherapy/Illumatherapy™ lighting)
All tubs in this product line come with electronic controls and
standard Chromotherapy or Illumatherapy
the operation instructions for the control system of your unit.

general Functions

This Jacuzzi tub is equipped with a seven-button electronic
©
control panel. The seven-button panel controls a two-speed
pump/motor, Chromotherapy or Illumatherapy
controls, and wave control. The LED lights (in the control
panel) indicate function levels. When switching between
functions, the LED for the inactive functions will dim and the
active function will brighten.
When the water level is below the sensor, the pump/motor can
not be activated. If the ON/OFF pump/motor button is pressed
at this time, the pump/motor will not operate. When the water
goes above the water level sensor, the pump/motor can be
activated. If the water level drops below the level sensor, the
pump/motor will shut off.
The pump/motor will automatically shut off thirty minutes after
the pump/motor was turned on.
NOte: Ensure the water level sensor located inside the bath
is free of any soap or dirt buildup.
Jacuzzi Luxury Bath Series: Installation and Operation
©
CONtrOL PaNeL
Left air valve,
. Read and follow
TM
Status LEDs
lighting, air
TM
Pump/Motor
status LEDs
Page 21
Left air Bath Right air
valve light valve
On-Off
Toggle
Wave
Pump/
switches
function
Motor
K339000Y • April 2008
Right air
valve,
Status LEDs