Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Cleanup
To avoid dulling and scratching the surface of the bathtub, never use abrasive cleaners. For most soiled surfaces, a
mild liquid detergent and warm water is sufficient. The following is also recommended:
•
Remove spilled plaster with a wood or plastic edge. Spots left by plaster or grout can be removed if lightly rubbed
with detergent on a damp cloth or sponge. Do not use metal scrapers, wire brushes or other metal tools, as they
will damage the bathtub's surface.
•
Paint, tar, or other difficult stains can be removed with Fantastik® or soapy water.
•
Minor scratches which do not penetrate the color finish can be removed by lightly sanding with 600-grit wet/dry
sandpaper. You can restore the glossy finish to the acrylic surface of the bathtub with a special compound,
Meguiar's #10 Mirror Glaze. If that is not available, use automotive rubbing compound followed by an application
of automotive paste wax.
•
Major scratches and gouges which penetrate the acrylic surface will require refinishing. Call Jacuzzi Luxury Bath
to find a service agent in your area.
Operation
Blower Operation
ON: Press the blower button once to turn the blower ON.
The blower will start on high speed.
OFF: Press the blower button a second time to turn
the blower OFF.
The last blower setting used is remembered by the system and will automatically resume upon next use.
Increase Speed
Press the (
) button to increase blower speed.
There are 5 blower intensities. Each push and release of the
(
) button will increase blower intensity through 5 incremental steps.
Alternately, if the (
) button is depressed and held, the blower intensity will increase
through each of the 5 blower intensities, stopping when the button is released.
The TLC (True Lumbar Comfort) air channels are designed to massage the lower back. Individual shape and
size, and water volume influence the direction and force of the air. Some splashing may occur at high speeds.
Reduce blower intensity to lessen the effect.
Decrease Speed
Press the (
) button to decrease blower speed.
There are 5 blower intensities. Each push and release of the (
decrease blower intensity through 5 incremental steps.
Alternately, if the (
) button is depressed and held, the blower intensity will decrease
through each of the 5 blower intensities, stopping when the button is released.
Page 14
G
) button will
www.jacuzzi.com
Comfort Pure Air™ Bath
Installation and Operation
Publicité
Table des Matières
Dépannage
