Clearance Recommendations; Unit Installation - Jacuzzi Luxury Serie Mode D'emploi

CLearaNCe
reCOMMeNDatiONs
The installation clearance
recommendations below are
to ensure that installers have
enough space to maneuver
and insert tub. The Jacuzzi
©
Luxury line whirlpool tubs
have electrical, plumbing and
lighting systems installed.
Do not lift the bath by the
plumbing or wiring at any
time; handle by the shell only.

uNit iNstaLLatiON

Note that the motor/pump protrudes beyond the bath rim
a maximum distance of 1" (25.4 mm). Care should be
used when lowering the tub into cutout to prevent injury to
installer(s), finished surfaces, or tub and components.
Clearance around bath must be provided for installers, see
Clearance Recommendations. Damage to shell, plumbing,
wiring, lighting, and other components because of failure to
observe minimum clearances are not the responsibility of
Jacuzzi Whirlpool Bath.
©
All deck finish work must be completed before installation.
Use the Cutout Template provided. Flooring surface inside the
cutout to deck height must not exceed height specification for
tub.
Cover all finished surfaces to protect from damage during tub
installation.
Turn OFF power supply to dedicated GFCI protected circuits.
Jacuzzi Luxury Bath Series: Installation and Operation
©

CLearaNCe reCOMMeNDatiONs

Bath Bath
Cutout Cutout
32"
Bath
Bath
Cutout Cutout
32"
Minimum vertical clearance
for installer to position bath
3"
Two-Wall Installation
3"
Three-Wall Installation
32"
48"
Page 1
32"
Bath Bath
Cutout Cutout
10"
32"
Bath Bath
Cutout Cutout
10" 3"
See Specifications
for this dimension
Motor
Heater
K339000Y • April 2008