Rapidheat; Operation; Vacuum/Pressure Switch; High-Limit Switch - Jacuzzi Luxury Serie Mode D'emploi

raPiDheat™

These units have a RapidHeat
intake or discharge lines. The heater will help maintain the
temperature of the water in the bath.

Operation

With the heater installed and the whirlpool pump is operating,
the heating function is totally automatic. No user control
required.

Vacuum/Pressure switch

The heater is equipped with a preset vacuum/pressure switch
which will not allow the heater to turn ON if the pump is not
running with water flowing through the whirlpool system.

high-Limit switch

The heater includes an exclusive High-Limit switch. This
safety circuit will not false-trip from hot tap water. It will only
turn off the heater if the thermostat fails. To reset, press
the button. If the high-limit trips frequently, contact your
Authorized Electrical/Mechanical Service Provider.

CLeaNiNg the Bath

To clean your bath, simply use a mild, nonabrasive liquid
detergent solution. You can protect and restore the gloss to
a dulled acrylic surface by applying Meguiar's No. 10 Mirror
Glaze , a product specifically designed for use on acrylic
®
finishes. If Meguiar's is not available, an acrylic polish of
equal quality or automotive paste wax is acceptable.
Never use abrasive household cleaners on any Jacuzzi
Whirlpool Bath product.

rePairs tO the surFaCe

Minor scratches which do not penetrate the color finish
can be removed by lightly sanding with 600-grit, wet/dry
sandpaper. Restore the gloss using Meguiar's Mirror Glaze
or automotive paste wax.
Major scratches and gouges which penetrate the acrylic
surface will require refinishing. Ask your Jacuzzi
Bath dealer for special instructions.
Jacuzzi Luxury Bath Series: Installation and Operation
©
heater installed on the
TM
®
Whirlpool
®
rapid
®
Page 23
Heater
On
HEATER ON
heat
High-Limit
Switch
OVERHEAT
PROTECTION
PUSH TO RESET
K339000Y • April 2008