Plumbing And Water Supply; Drain Information; Plumbing; Water Supply - Jacuzzi Luxury Serie Mode D'emploi

PLuMBiNg aND Water suPPLy

Details for drain information, plumbing, and water supply are
provided below.

Drain information

A drain/overflow assembly (sold separately) must be installed
on the bath, water tested, and connected to the sanitary
system of the house. After opening the carton, inspect for
damage and verify that the kit is of the proper finish. In the
Jacuzzi Whirlpool Bath drain/overflow kit, note that the
©
waste flange, strainer, overflow cover and cover screws are
packaged in a separate package within the kit to protect the
trim finish. Follow the installation instructions provided with
the drain/overflow kit. After the drain is fully installed, test for
proper drainage. If the unit does not drain properly, rectify this
condition before proceeding with the installation. Jacuzzi
Whirlpool Bath is not responsible for removal or reinstallation
costs.
NOte: Watertight installation of the drain is the installer's
responsibility. Drain leakage is excluded from the Jacuzzi
Whirlpool Bath warranty of this product.

Plumbing

Pump, jets, and suction fittings for the whirlpool system are
factory plumbed in schedule 40 PVC piping.
All Jacuzzi Whirlpool Bath products are factory tested for
©
proper operation and watertight connections prior to shipping.
If leaks are detected, notify your Jacuzzi
dealer. Do not install the unit.

Water supply

Consult local authorities for plumbing code requirements in
your area.
iMPOrtaNt: Proper installation of the fill spout plumbing
and compliance with local codes are the responsibility of
the installer. Jacuzzi Whirlpool Bath does not warrant
©
connections of water supply fittings and piping, fill systems, or
drain/overflow systems. Nor is it responsible for damage to
the bath which occurs during installation.
CautiON: A nonflammable protective barrier must be placed
between soldering work and bath unit to prevent damage to
the bath.
Jacuzzi Luxury Bath Series: Installation and Operation
©

shOWer iNFOrMatiON

Because of some baths' unique contour design, a rigid shower
door cannot readily be installed. If a shower is desired, we
recommend a hand-held shower be installed in conjunction
with a shower curtain, as this will allow the user to control the
direction of the spray.
NOte: Proper installation of a shower is the responsibility of
the installer. Jacuzzi
damage to the unit or for water damage which might occur due
to its installation.

aNti-siPhON VaLVe

Optional Anti-Siphon valve installation. Anti-Siphon valve is
not supplied with the tub. Consult your local plumbing code
requirements for the minimum height above the tub rim.
©

CLeaN-uP aFter iNstaLLatiON

The acrylic finish will give long-lasting beauty when properly
maintained. To avoid dulling and scratching of the finish,
©
never use abrasive cleaners or harsh chemicals. A mild liquid
detergent and warm water will clean soiled surfaces.
Remove spilled plaster with a wood or plastic edge. Metal
tools will scratch the surface. Spots left by plaster or grout can
be removed if lightly rubbed with a mild detergent and a damp
cloth or sponge.
Minor scratches that do not penetrate the color finish can
be removed by lightly sanding the surface with a 600-grit,
Whirlpool Bath
©
wet-dry sandpaper. To restore the glossy finish, use a special
compound like Meguiar's No. 10 Mirror Glaze. If it is not
available, use an automotive rubbing compound followed by
an application of automotive paste wax.
Major scratches and gouges that penetrate the acrylic surface
may require refinishing. Ask your Jacuzzi
dealer for special instructions or visit our web site at:
To find service agent listings for:
Page 19
Whirlpool Bath is not responsible for
©
http://www.jacuzzi.com/
Electrical or Mechanical Repairs, visit:
http://jacuzzi.com/pdf/ASA.PDF
Finish, Surface, or Shell-Related Repairs, visit:
http://jacuzzi.com/pdf/AFC.PDF
Repair Parts or Accessories, visit:
http://jacuzzi.com/pdf/MPD.PDF
Whirlpool Bath
©
K339000Y • April 2008