Setup Menu; Lock Level - clage DSX Mode D'emploi Pour L'utilisateur

DSX ELECTRONIC MPS®
2. How to use

Setup menu

1
+
EN
Press
≥ 3 sec
4
5
Display flashes
9 8
Menu item order of "Setup menu"
LANGUAGE
TONE
BACKGROUND LIGHT
CHARGES PER KWH (CT)
CLOCK
LOAD DECREASE

LOCK LEVEL

TEMPERATURE LIMIT
FLOW LIMIT
Software version
2
Information about installed software version.
Note: Values of the Info menu cannot be modified or entered. Above mentioned values are
only given for your information!
Note: The values are for information only and are not suitable for billing purposes.
Setup menu
3
The setup menu offers a variety of adjustabilities, affecting the performance and
the display of the appliance.
Press the setup key
up the setup menu, the display confirms by " setup ".
6
Using the arrow keys
setting mode of the individual parameter (e.g. tone) is activated by pressing the setup
key , the display flashes. You can now select the new parameter value with the
arrow keys
The new parameter value is stored when pressing the setup key
7
key you will get back to the standard display.
Individual parameter as follows:
Language
Operating language can be selected.
Setting options:
"1" German
"0" English
Tone
Activation and deactivation of key tone.
Setting options:
"on" key tone activated
"--" key tone deactivated
Background light
Activation and deactivation of display background light
Setting options:
"on" background light constantly on
"At" background light switches on automatically e.g. when keys are pressed, and switches off
automatically after some time
"--" background light off
Charges per kWh (ct)
The relevant electricity tariff can be entered.
Setting options:
from 0 ct to 199,90 €
Clock
Time settings can be done
Setting options:
"h" hours
"min" minutes
"s" seconds
The info key
The arrow keys
Pressing the setup key
and the info key simultaneously for at least 3 seconds to call
and you can switch over to the individual parameters. The
and .
selects the clock parameter to be changed ("h","min" or "s").
and changes the set value shown.
stores the new value.
16
again. With info