Cooking Cycle Start And End Procedure - Angelo Po FX 82 E3T Manuel D'utilisation Et D'installation

10 – Press the "emergency rinse cycle" button and
wait for the cleaning cycle to end.
11 – Press the button to return to the previous page.

COOKING CYCLE START AND END PROCEDURE

To start a cooking cycle (in manual or programmed
mode), proceed as follows.
1 – Switch on the appliance (see page 9).
2 – Select the cooking type and set all the parameters
necessary for correct operation (see page 18).
3 – Press the button.
If the page appears on the display,
the preheating function is on. Wait
for the preheating stage to be com-
pleted before placing the foods in-
side the cooking chamber.
At the end of the preheating stage,
the display will show page.
English
>>>
>>>
>>>
Cooking chamber temperature
Preheating temperature
>>>
- 37 -
emergency
rinse cycle
Time
IDM-39617715400.tif
IDM-39617715500.tif
Use and installation manual
IT
GB
DE
FR
ES