Bernina bernette 10 Mode D'emploi page 72

10 12 15
EN Blind hem/lingerie stitch
Presser foot available as optional accessory.
For hems, curtains, trousers, skirts, etc.
Blind hem/lingerie for firm fabrics.
Blind hem for stretch fabrics.
Set the machine as illustrated.
Note:
It takes practice to sew blind hems. Always
make a sewing test first.
Fold the fabric as illustrated with the wrong
side uppermost. (1)
Place the fabric under the foot. Turn the
handwheel forward by hand until the needle
swings fully to the left. It should just pierce
the fold of the fabric. If it does not, adjust the
stitch width accordingly. (2)
Adjust the guide (3) by turning the knob (4)
so that the guide just rests against the fold.
Sew slowly, by pressing the foot control
lightly, guiding the fabric along the edge of
the guide.
Please note:
No "S" marking is shown on the stitch length
dial by model 10.
502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR