Bernina bernette 10 Mode D'emploi page 104

10 12 15
502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR
EN Darning
- Turn stitch length dial to the desired length.
- Pattern selector on " " or "
- Center needle position.
- Position the fabric to be darned under the
presser foot together with the under laying
fabric to be used.
- Lower the presser foot and alternately
sew forward or reverse using the reverse
sewing lever.
- Repeat this motion until the area to be
darned is filled with rows of stitching.
For reverse sewing instructions, see figure A,
page 42.
Please note:
No "S" marking is shown on the stitch length
dial by model 10.
".