Table des Matières
Publicité
10
12
15
502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR
EN
Practical stitches
Set the machine as illustrated.
Turn the stitch width dial and stitch length dial
to suit the fabric.
Set stitch length control between "1" - "2". Set
stitch width control between "3" - "5".
(model 15)
Shell hem (1)
Pattern selector on "
".
For decorative edges.
Suitable for edges on sheer, fine and stretch
fabrics. The larger stitch should go just over
the edge of the fabric to create the shell effect.
Rampart (2)
Pattern selector on "
" .
For flat joining seams, sewing on elastic, visible
hems.
This stitch can be used for firm, thicker fabrics.
Bridging (3)
Pattern selector on "
".
For seams, place mats, tablecloths. Decorative
joining seam for a fagotted effect. Gathering
with cord or shirring elastic.
Scallop stitch (4)
Pattern selector on "
".
For a delicate edge finish along the edge of
fabric.
Please note:
No "S" marking is shown on the stitch length
dial by model 10.
Publicité
Table des Matières
