Table des Matières
Publicité
10
12
15
502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR
EN
Attaching lac
- Turn stitch length dial to the desired length.
- Pattern selector on "
" or "
- Center needle position.
- Fold in the edge of the fabric
(approximately 6 mm 1/4").
- Place the lace under the folded edge of
the fabric allowing it to underlap the fabric
slightly as required by the pattern of the
lace.
- Sew on the edge of the fabric fold.
- You can add a decorative touch by using
the satin stitch to sew on the lace.
Please note:
No "S" marking is shown on the stitch length
dial by model 10.
".
Publicité
Table des Matières
