Table des Matières
Publicité
10
12
15
502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR
Applique
EN
- Turn stitch length dial to the desired length.
- Pattern selector dial on "
- Cut out the applique design and baste it to
the fabric.
- Sew slowly around the edge of the design.
- Trim excess material outside the stitching.
Make sure not to cut any stitches.
- Remove the basting thread.
- Tie top and bottom thread under the
applique to avoid unraveling.
Please note:
No "S" marking is shown on the stitch length
dial by model 10.
" or "
" .
Publicité
Table des Matières
