BH Tecnovita YV50 Manuel D'utilisation page 9

DISPOSAL OF YOUR OLD
APPLIANCE.-
1. When this crossed-out wheeled bin
symbol Fig.1, is attached to a product
it means the product is covered by the
European Directive 2002/96/EC.
2. All electrical and electronic products
should be disposed of separately from
the municipal
designated
appointed by the government or the
local authorities.
3. The correct disposal of your old
appliance will help prevent potential
negative consequences
environment and human health.
4. For more detailed information about
disposal of your old appliance, please
contact your city office, waste disposal
service or the shop where
purchased the product.
MONITOR ELEMENTS.-
A: These 2 displays show the time
and vibration frequency.
waste stream
collection facilities
for
English
The electronic monitor has 5 push-
buttons or keys.
B: TIME/SPEED.- Key to switch
between time and frequency settings.
C: PROGRAM.-
selection key.
D: START/STOP.- Key to switch the
via
platform on or off.
(+)
E: Increase selection key.
(-)
Decrease selection key.
the
START-UP.-
1 Plug the mains cable (68) into the
socket (M) on the column, Fig. 2.
The other end of the cable is plugged
into the electric wall socket (220V).
Set switch (L) to position (I).
you
2. Press the ON/OFF key, select the
desired time, frequency. Press the
START/STOP key and the platform
will start after a few seconds.
9
Manual/program