Led Indicators And Their Actions; Battery And Led States - iStorage CLOUDASHUR Manuel D'utilisation

PART A

1. LED indicators and their actions

LED LED State
RED Solid
RED - Fade Out
GREEN Blinking
GREEN Solid
GREEN Solid

2. Battery and LED States

Note: The normal function of the cloudAshur may be disturbed by strong Electro-Magnetic Interference. If
so, simply power cycle the product (power off then power on) to resume normal operation. If normal operation
does not resume, please use the product in a different location.
Low Battery Sensor
The cloudAshur incorporates voltage detection circuitry that monitors the battery output when the cloudAshur is powered on.
When battery output drops to 3.3V or below, the
connect the cloudAshur to a powered USB port and charge for 20-30 minutes. Once recharged, the cloudAshur will resume
normal function.
To wake from Idle State
Idle state is defined as when cloudAshur is not being used and all LEDs are off.
To wake cloudAshur from the idle state do the following.
Press and hold down the SHIFT (
button for one second or connect the
to a powered USB port
cloudAshur
#6
Description
Locked cloudAshur (in either
Standby or Reset states)
cloudAshur Turning off
Unlocked cloudAshur as Admin
(not connected to USB port)
Unlocked cloudAshur as User
(not connected to USB port) or
cloudAshur
in User mode
cloudAshur unlocked and
connected to host
RED LED flashes three times and fades out. At this point, the User should
)
www.istorage-uk.com
LED LED State
BLUE Solid
RED, GREEN and
BLUE Blinking
GREEN and BLUE
Blinking together
GREEN and BLUE
Blinking alternately
RED, GREEN and BLUE LEDs blink once in sequence then the
GREEN LED blinks twice and finally switches to a solid
LED indicating the
cloudAshur
Description
cloudAshur in Admin mode
Waiting for User PIN entry
Waiting for Admin PIN entry
Authentication in progress
Blue LED blinks every 5 seconds
when charging is in progress
RED
is in Standby State