Setting The Unattended Auto-Lock Clock - iStorage CLOUDASHUR Manuel D'utilisation

Note: When the cloudAshur is in Admin Mode, the
which time the cloudAshur can accept instructions via the keypad allowing it to be configured with a host of security
features. If no key event happens within 30 seconds, the cloudAshur will exit Admin mode automatically - the solid
BLUE LED switches to a solid
To immediately exit Admin Mode (solid
solid BLUE LED switches to a solid
your cloudAshur must first be in the idle state (all LEDs off) before an Admin/User PIN can be entered.

30. Setting the Unattended Auto-Lock Clock

To protect against unauthorised access if the cloudAshur is unlocked and unattended, the cloudAshur can be set to
automatically lock after a pre-set amount of time. In its default state, the cloudAshur Unattended Auto Lock time-out
feature is turned off. The Unattended Auto Lock can be set to activate between 5 - 99 minutes.
To set the Unattended Auto Lock time-out, first enter the "Admin Mode" as described in section 5. Once the cloudAshur is
in Admin Mode (solid BLUE
1. In Admin mode, press and hold down both
KEY ( ) + 5 buttons
2. Enter the amount of time that you would like to set the Auto-Lock time-out feature for, the minimum time that can
be set is 5 minutes and the maximum being 99 minutes (5-99 minutes). For example enter:
05 for 5 minutes
20 for 20 minutes
99 for 99 minutes
3. Press the SHIFT ( ) button
Note: When the cloudAshur is in Admin Mode, the
which time the cloudAshur can accept instructions via the keypad allowing it to be configured with a host of security
features. If no key event happens within 30 seconds, the cloudAshur will exit Admin mode automatically - the solid
BLUE LED switches to a solid
To immediately exit Admin Mode (solid
solid BLUE LED switches to a solid
your cloudAshur must first be in the idle state (all LEDs off) before an Admin/User PIN can be entered.
BLUE
RED LED which then fades out to the Idle state (all LEDs off).
LED), press and hold down the SHIFT (
BLUE
RED LED which then fades out to the Idle state. To unlock and access your data,
LED) proceed with the following steps.
BLUE
RED LED which then fades out to the Idle state (all LEDs off).
BLUE LED), press and hold down the SHIFT (
RED LED which then fades out to the Idle state. To unlock and access your data,
www.istorage-uk.com
LED will remain on and solid for 30 seconds only, during
Solid BLUE LED will change to blinking
and BLUE LEDs
Blinking GREEN
a solid GREEN
solid BLUE LED indicating the Auto-Lock time
out is successfully configured
LED will remain on and solid for 30 seconds only, during
) button for a second - the
GREEN
and BLUE LEDs will change to
for a second and then finally to a
) button for a second - the
#25