5. To Enter Admin Mode
To Enter Admin Mode, do the following.
1. Press and hold down the SHIFT (
one second
2. In Standby State (solid
RED
KEY ( ) button once
3. With the
GREEN
and
BLUE
enter the Admin PIN (factory pre-set 11223344)
and press the KEY ( ) button once
4. Press the KEY ( ) button Three times
within 2 seconds (KEY ( ) x 3)
Note:
When the cloudAshur is in Admin Mode, the
which time the cloudAshur can accept instructions via the keypad allowing it to be configured with a host of security
features. If no key event happens within 30 seconds, the cloudAshur will exit Admin mode automatically - the solid
BLUE
LED switches to a solid
To immediately exit Admin Mode (solid
solid
BLUE
LED switches to a solid
your cloudAshur must first be in the idle state (all LEDs off) before an Admin/User PIN can be entered.
6. To Exit Admin Mode
When the cloudAshur is in Admin Mode, the
cloudAshur can accept instructions via the keypad allowing it to be configured with a host of security features. If no key event
happens within 30 seconds, the cloudAshur will exit Admin mode automatically - the solid
LED which then fades out to the Idle state (all LEDs off).
To immediately exit Admin Mode (solid
switches to a solid
RED
which then fades out to the Idle state.
) button for
LED) press the
LEDs blinking together,
BLUE
RED
LED which then fades out to the Idle state (all LEDs off).
BLUE
LED), press and hold down the SHIFT (
RED
LED which then fades out to the Idle state. To unlock and access your data,
BLUE
LED will remain on and solid for 30 seconds only, during which time the
BLUE
LED), press and hold down the SHIFT (
www.istorage-uk.com
RED,
GREEN
and
sequence then the
finally switches to a solid
cloudAshur is in Standby State
GREEN
and
BLUE
GREEN
and
BLUE
several times and then to a solid
changing to a blinking
cloudAshur is unlocked
Blinking
GREEN
LED will change to a solid
LED indicating the cloudAshur is in Admin mode
LED will remain on and solid for 30 seconds only, during
) button - the solid
BLUE
LEDs blink once in
GREEN
LED blinks twice and
RED
LED indicating the
LEDs blink together
LEDs will alternately blink
BLUE
LED
GREEN
indicating the
BLUE
) button for a second - the
BLUE
LED switches to a solid
BLUE
LED
RED
#9