Datashur Personal Layout; Led Indicators And Their Actions - iStorage DATAshur 2 personal Manuel D'utilisation

1. datAshur Personal

2. LED indicators and their actions

LED LED State
Red - Fade Out
Red blinking
Green Solid
Green blinking
Green flickering
Blue Solid
Blue Blinking
#6
Layout
2
LOCK LED, stand by while the drive is locked
UNLOCK LED, drive is unlocked when flashing
Keypad
Key Button, used to activate the drive and to enter PIN codes
BLUE LED, when solid, the drive is connected to the computer, when
flashing data is being transferred.
Description
Locking down/incorrect PIN entry
Locked and awaiting factory default
PIN or User defined PIN entry
datAshur Personal is unlocked in
2
User mode
When connected to a USB port if
Green Led blinks every 2 seconds
this indicates the datAshur Person-
al has been set as 'Read-Only'
2
datAshur Personal is unlocked in
2
Admin mode
Connected to a USB port
Data exchange with host/changing
User PIN/when not connected to a
USB port indicates an Admin PIN
exists
www.istorage-uk.com
LED LED State
Red and Green
/
blinking alternately
Red and Green
flickering together
&
Green and Blue
blinking together
&
Green and Blue
flickering together
&
Red and Blue
blinking together
&
Red and Blue
flickering together
&
Red, Green & Blue
blinking in sequence
/ /
to Red and fade out
Description
Factory reset/deleting files in Admin
mode
Awaiting Admin PIN entry
User Options mode
Admin Options mode
When not connected to a USB port
indicates that both User and Admin
PINs have been set on the
datAshur Personal
2
Awaiting Admin PIN change
Drive has developed a fault.
Please retry the command and if the
problem persists contact technical
support