Publicité
Destination bin is full. The destination bin may be full, and the iBOT is unable to
push the piece it is carrying, into the bin. In that case, empty the bin and
replace it back in the machine. Pull the partially-delivered piece from the iBOT
and place it in the bin.
Click the Clear Jam button on the Run screen, and click Start to continue
running.
Figure 149: Overfilled bin
The piece being delivered may have not made it into the bin properly. It may
have slipped under the lip of the bin and got wedged in there as shown in the
picture.
Pull out the wedged piece and place it in the destination bin.
Click the Clear Jam button on the Run screen, and click Start to continue
running.
Figure 150: Mail wedged under lip of bin
173
Mail Matrix Operator Manual
OPEX Corporation
Publicité
Chapitres
