Publicité
Removing iBOTs from delivery columns
In the event that an iBOT requires maintenance, it can be quickly and easily
removed from the system. An iBOT in need of repair can be swapped for
another and returned to OPEX for service.
To remove an iBOT from a delivery column:
Sometimes an iBOT will get stuck in a delivery column, too far away to remove
it from the loading assembly. In this case, you must either remove all the bins
in the area or the go inside the machine to remove the iBOT.
1. Open the door to the loading column or the door at the end of the last
delivery column. This will release the machine's interlocks and make it
easier to manipulate the gates inside the delivery columns.
2. Find a way to access the iBOT in need of attention. You may have to
remove several bins and/or move some of the other iBOTs up or down to do
84
Figure 63: iBOT stuck in a delivery column
Mail Matrix Operator Manual
OPEX Corporation
Publicité
Chapitres
