Publicité
Clearing other iBOTs out of the way / Bringing them Home
In certain situations, it may be a good idea to bring all the non-jammed iBOTs
home. For example:
• It is difficult to reach the jammed iBOT due to other iBOTs being in the way.
• The jam looks complicated and may take a while to recover from, and
bringing the other iBOTs home would save them from running out of power
and being stranded.
To bring the non-jammed iBOTs home, click the Home button on the Run
screen. All the non-jammed iBOTs will try to get back home. Please be patient
since this may take a little while. It is possible that some iBOTs may not be
jammed but are still unable to get home.
Input Section E-Stop Pressed
Description
This jam occurs if the E-Stop switch in the input section (pointed
to in the picture) has been pressed.
Resolution
E-Stop switches enable a quick stop of all motors in the machine
in the event of an emergency involving potential personnel injury. Check to
ensure that it is safe to run the machine. To reset the E-Stop, twist the E-Stop
knob clockwise. The machine can be restarted now by clicking the Start
button on the Run screen.
162
Figure 139: E-stop location
Mail Matrix Operator Manual
OPEX Corporation
Publicité
Chapitres
