Cleaning The Printer - Opex Mail Matrix Manuel De L'opérateur

Cleaning the printer

WARNING: Shut down the Mail Matrix and allow printer to cool to room
temperature before servicing.
Open the hinged printer shroud and inspect the components for loose debris
and residue.
1. Remove any loose debris with a soft cloth and/or compressed air.
CAUTION: If using compressed air to remove debris from the printer,
be careful to prevent component damage. Do not use flammable, high
CAUTION
pressure, "canned air" to clean the printer.
2. Remove any residue build-up from the print head and rollers.
To gain access to the printer's chassis (Figure 116), push purple release
button (1) to drop pressure roller plate (2) downward. If the plate must be
removed, take out the thumbscrew (3).
Figure 116: Accessing the printer's chassis
Mail Matrix Operator Manual
OPEX Corporation
1
3
2
125