Publicité
iBOT Over-Voltage Detected
Description
This jam occurs when an iBOT detects that it has charged up to
a voltage that exceeds its maximum limit.
Resolution
Click the Start button in the Run screen to continue running. If
the Over-Voltage jam occurs again with the same iBOT, remove that iBOT
from the system.
Clearing other iBOTs out of the way / Bringing them Home
In certain situations, it may be a good idea to bring all the non-jammed iBOTs
home. For example:
• It is difficult to reach the jammed iBOT due to other iBOTs being in the way.
• The jam looks complicated and may take a while to recover from, and
bringing the other iBOTs home would save them from running out of power
and being stranded.
To bring the non-jammed iBOTs home, click the Home button on the Run
screen. All the non-jammed iBOTs will try to get back home. Please be patient
since this may take a little while. It is possible that some iBOTs may not be
jammed but are still unable to get home.
160
Mail Matrix Operator Manual
OPEX Corporation
Publicité
Chapitres
