Opex Mail Matrix Manuel De L'opérateur page 146

Auto feeder jams
Jams can sometimes occur at the auto feeder, where envelopes can get stuck
on the way out of the feeder. When a jam occurs here, pull the stuck envelopes
out of the feeder and press START on the Run screen to continue processing
mail.
Load failure jams
The system will call a load failure jam when a piece does not arrive on the
iBOT in the specified amount of time. This jam can occur when a piece is late
or, for some reason, does not make it to the awaiting iBOT at all.
Figure 53: Envelope feeder jam
Figure 54: Load failure
Mail Matrix Operator Manual
OPEX Corporation
73