Publicité
Key From Image mode
Fully-configured machines can run in different modes which use installed
options to minimize the role of the operator in the process. These modes are
only available if the image capture/MLOCR and/or auto-feeder options are
installed.
Key From Image mode sends images for mail pieces that could not be
identified by the image capture/MLOCR setup to an available keying station.
Key From Image mode can be used with or without the auto-feeder.
1. After selecting the job and choosing the From Image keying option, choose
from the other options as desired:
• Select the OCR Assist mode. Turn OCR Assist ON if you have the image
capture/MLOCR option installed and you want the software to attempt
to determine the recipient.
• Select AUTO for the Auto Feeder mode if you want to use the installed
auto feeder to feed your mail. Select OFF to feed the mail manually.
• Select a Piece Orientation. Usually, you will want to set this to Normal.
Figure 42: "From Image" keying option
Mail Matrix Operator Manual
OPEX Corporation
61
Publicité
Chapitres
