Electric pallet truck EGU PS 15
English
2.8
Crane-Carried
Hoisting position is specially designed on chassis by the manufacturer
For convenience of conveyance.
Place the truck at a safe position
Point of strength of the crane must be attached to hoisting position
Point of strength of the crane must be attached to hoisting position to avoid slip of the truck.
During hoisting, the hoisting equipment applied must be attached to hoisting position without touching
the truck.
3
Operating Instructions
3.1
General Arrangement Drawing
1
Cover left-half
2
Control handle
3
Cover right-half
4
Fork frame
5
Load roller
6
Protect sleeve
7
Battery indicator
8
Power key
9
Emergency switch
3.2
Operating elements – General arrangement drawing
technische Änderungen vorbehalten
1 Up/down switch:
2 Forward/Backward button:
3 Emergency reverse button
4 Horn switch
5 Speed indicator (green/red)
6 High/Low speed Switch button:
design changes under reserve
F 08.01.161
When the switch button (6) is pressed first time, the
speed is lowered and the indicator (5) glows red,
indicating low speed mode.
When it is pressed again, the truck returns to high
speed mode, and the indicator (5) glows green.
changements techniques sous réserve
19