SICE S 60 Manuel D'utilisation page 75

Get to know your machine. The best way to prevent accidents and obtain top perfor-
mance from the machine is to ensure that all operators know how the machine works.
Learn the function and location of all commands.
Carefully check that all controls on the machine are working properly.
The machine must be installed properly, operated correctly and serviced as necessary
in order to prevent accidents and injuries.
Start the machine with the main switch (A, Fig. 11) and make sure that the hydraulic
power unit motor is rotating in the direction indicated by the arrow (A, Fig. 12) which
can be seen on the motor cap.
Otherwise, the rotation direction must be corrected immediately in order not to damage
the pump unit.
The whole machine operates at a low voltage
level (24V) apart from the motor of the hydraulic
control unit that is powered with the mains
voltage.
Make sure that all parts of the hydraulic circuit are tightened correctly. If pressurised
oil escapes, it can cause serious injury.
Never raise the tool arm (I fig.11) if the tool unit (L fig.11) is not fitted.
To prevent accidents when using the included or optional accessories, make sure
that the mechanical parts have been correctly installed and well fixed to the parts.
When working, firmly grip the manual accessories.
User Manual S60
CAUTION!
CAUTION!
CAUTION!
CAUTION!
A
12
UK
75