When working with wheels with a diameter greater than 1,500 mm, or with a weight higher
than 200 kg, during the phase of loading-locking the wheel on the turntable, it is mandatory
that you work in safe conditions, following the instructions provided below:
- Tip the tool-holder arm backward.
- Install the wheel anti-tipping guard (A, Fig. 18) in its housing.
- Load the wheel in a vertical position (Fig. 18) so that its external side is next to the guard.
- Activate the turntable in the best way for loading and locking the wheel.
- Remove the guard and then proceed with the mounting and demounting operations.
A
In view of the size and weight of tyres for earthmoving machines, and to ensure safe operating
conditions, a second person must be available to keep the wheel in a vertical position.
A fork-lift truck or a crane should be used when handling wheels weighing more than 500 kg.
Do not leave the wheel locked on the turntable for periods longer than the normal operating
pauses.
Never leave your work station with the wheel clamped on the turntable and lifted
off the ground.
User Manual S60
DANGER
DANGER
CAUTION!
18
UK
83