SICE S 60 Manuel D'utilisation page 63

• Keep your hands and fingers away from the mounting tool during operation.
• Keep your hands and fingers away from the bead breaker disc during its operation.
• Keep hands and other body parts away from moving parts.
• Do not use tools other than those supplied with the tyre changer or original accessories.
• Use lubricant that is specific for tyres in order to prevent tyre seizure.
• Pay attention while handling the rim and tyre and while using the lever
9. Hazard of electric shock.
• Do not clean the electric parts with water or high pressure air jets.
• Do not operate machine with a damaged power cord
• If an extension is necessary, use a cable with nominal features equal to or greater than
those for the machine. Cables with nominal features that are lower to
those of the machine could overheat and cause a fire.
• Make sure that the cable is positioned so that no one will trip over
it and it cannot be pulled.
10. Risk of Eye Injury. During the bead insertion and inflation phase,
debris, dust and fluids could be projected into the air. Remove any
debris present in the tread of the tyre and on the tyre surface. During all the work phases,
wear protective goggles with OSHA and EC approval, or other certified devices.
11. Always carefully inspect the machine before using it. Missing, damaged or worn equipment
(including the hazard labels) must be repaired or replaced before start-up.
12. Never leave nuts, bolts, tools or other materials on the machine. They
could remain trapped in moving parts and cause malfunctions or be
projected out of the machine.
13. DO NOT install tyres that are cut, damaged, decayed or worn. DO NOT
mount tyres on bent, rusted, worn, warped or otherwise damaged rims.
14. If the tyre is damaged during the mounting phase, do not try to com-
plete the mounting operation. Remove it and take it away from the service area, marking
it as damaged.
15. The internal parts in this machine could create contacts or sparks if exposed to flammable
vapours (petrol, paint thinner, solvents, etc.). Do not install the machine in a narrow area
or below floor level.
16. Never operate the machine if you are under the effects of alcohol, medications and/or
drugs. If you are taking prescription or over the counter medication, you must consult a
medical professional regarding any side effects of the medication that could hinder your
ability to operate the machine safely.
17. Always use OSHA, EC approved and authorised personal protective equipment (PPE) or
equipment with equivalent certification while operating the machine.
Consult your supervisor for additional instructions.
18. Remove jewellery, watches, loose clothing, ties and restrain long hair
before using machine.
19. Wear protective, non-slip footwear while using the tyre changer.
20. Wear proper back support and employ proper lifting technique when
placing, moving, lifting or removing wheels from the tire changer.
21. Only suitably trained personnel can use, service and repair the machine.
Repairs may only be performed by qualified personnel. Employers
must determine if an employee is qualified to carry out any machine
repair safely if the operator has attempted to make the repair.
22. The operator must pay close attention to the warnings on the equip-
User Manual S60
UK
63