Tips And Recommendations For Installation - SOMFY Oximo 40 Wirefree WF RTS Notice

2.3.6. Re-setting the end limits (for end limits set manually)
Readjusting the upper end limit
1) Press the Up button to bring the motorised product to the end limit to be readjusted.
2) Press the Up and Down buttons at the same time until the motorised product moves
up and down.
3) Press the Up or Down button to move the motorised product to the new desired
position.
4) To confirm the new end limit, press the my button until the motorised product moves
up and down.
Readjusting the lower end limit
1) Press the Down button to bring the motorised product to the end limit to be
readjusted.
2) Press the Up and Down buttons at the same time until the motorised product moves
up and down.
3) Press the Up or Down button to move the motorised product to the new desired
position.
4) To confirm the new end limit, press the my button until the motorised product moves
up and down.
2.3.7. Changing the direction of rotation
Position the motorised product at the mid-height position.
1)
Press the Up and Down buttons at the same time until the motorised product moves
2)
up and down.
Press the my button until the motorised product moves up and down.
3)

2.4 TIPS AND RECOMMENDATIONS FOR INSTALLATION

2.4.1 Questions about the Oximo?
Observations
The motorised product does
not operate.
The motorised product does
not respond to the wake-up
command.
Copyright © 2017 Somfy SAS. All rights reserved.
Possible causes
The wiring is incorrect.
The control point battery is low.
The control point is not compatible.
The control point used has not been programmed
into the motor.
The motorised product is not set.
1
3
1
3
1
4
Solutions
Check the wiring and modify it if necessary.
Check whether the battery is low and replace it if necessary.
Check for compatibility and replace the control point if
necessary.
Use a programmed control point or program this control
point.
Commission the motorised product.
Images not contractually binding
EN
2
4
2
4
2
31