Adding/Deleting Rts Transmitter; Adding/Deleting Rts Sensors - SOMFY Sonesse 30 RTS Notice D'installation

7.4. Adding/Deleting RTS transmitter

Find an RTS transmitter programmed in the
motor.
1) Press and hold the RTS programmed
transmitter (A) PROG button or the motor
PROG button, until the shade makes an
Up and Down movement: the motor is in
programming mode.
2) Briefly press the RTS transmitter (B)
PROG button, to add or delete: the shade
makes an Up and Down movement, and the
RTS transmitter is programmed or deleted
from the motor.

7.5. Adding/Deleting RTS sensors

Find an RTS transmitter programmed in the
motor.
1) Press and hold the RTS programmed
transmitter (A) PROG button or the motor
PROG button, until the shade makes an
Up and Down movement: the motor is in
programming mode.
2) Briefly press the RTS sensor (C) PROG
button, to add or delete: the shade makes an
Up and Down movement, and the RTS sensor
is programmed or deleted from the motor.
10
1
PROG.
A
PROG.
A
2
PROG.
B
PROG.
B
C
C
PROG.
1 A
PROG.
A
PROG.
C
2
PROG.
C
Copyright © 2013-2016 Somfy SAS. All rights reserved
C
C
C
C