Sentiotec PRO-C2 Instructions De Montage Et Mode D'emploi page 29

Installation instructions, only for experts
Changing the light dimming characteristic
Because incandescent bulbs and LEDs react differently to the dimming function,
it is possible to select the dimming characteristic according to the light system used.
1. Open the technician menu (see 26).
2. Turn the top knob to the light symbol (position C – see point 9.2 on page 30).
► The light symbol lights up.
► In the top display, "tYPE" appears.
► In the bottom display, "BULB" appears.
("BULB" means the dimming characteristic for incandescent bulbs
is activated.)
3. Turn the bottom knob to the left.
► In the bottom display, "LED" appears.
("LED" means the dimming characteristic for LEDs is activated.)
Querying the software version
To query the software version of your sauna control unit, carry out the follow-
ing steps:
1. Open the technician menu (see 29).
2. Turn the top knob to the eco symbol (position I – see point 9.2 on page 30).
► The software version of your control unit appears in the top display.
Exiting the technician menu
● Press the bottom knob for one second.
► The bottom knob stops flashing.
► The top knob lights up.
► The technician menu closes.
► Your settings were saved.
WORLD OF WELLNESS
p. 29/48
EN