Safety Instructions Relating Specifically To The Equipment - Meister MFW300-1 Traduction Du Manuel D'utilisation Original

MW-5454300-Bediene-1602_(4) 18.02.16 09:36 Seite 52
the power tool for operations different
from those intended could result in a
hazardous situation.
h If you notice anything unusual:
Switch off the power tool. Remove
the device from the power supply.
Have the device checked by
authorised specialist personnel.
These may include: unusual noises,
smells, vibrations etc.
5 Service
a Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This
will ensure that the safety of the
power tool is maintained.
6 – Safety instructions
relating specifically to
the equipment
• Hold the power tool by the insulated
handle when carrying out tasks
where there is a risk of the tool
coming into contact with hidden
power cables or its own cable.
Contact with a live cable may also
cause metal tool parts to become live
with the risk of an electric shock.
• Wear anti-vibration gloves when
working for long periods. Prolonged
working with vibrating tools may lead to
circulation problems and neurological
conditions (vibration white finger/
Raynaud's syndrome).
• When sanding paint with lead
content and certain types of wood,
metal etc. harmful/poisonous/
carcinogenic dust may be released.
Touching or inhaling the dust poses
a risk to the operator and any
52
bystanders. For this reason, an
extraction device should always be
fitted. Appropriate personal
protective gear should therefore be
worn, including breathing protection.
• Keep children and bystanders away
while operating power tools.
• Prevent unintentional starting. Make
sure the power tool is switched off
before connecting it to the power
supply, picking it up or carrying it.
Serious accidents can happen if your
finger is on the main switch, or if the
tool is already switched on when you
plug it in.
• Always pull the plug out of the power
socket before carrying out adjustments
to the tool. This precaution prevents
the machine from starting accidentally.
• Never allow persons to operate the
machine who are not familiar with it or
who have not read these instructions.
• Do not operate the tool in harsh
environments (e.g. explosive
atmospheres, high buildings, damp
conditions.
Safety requirements with regard to
fire prevention
Keep a fire extinguisher at hand.
For wood and paper fires: Powder fire
extinguisher (fire class ABC) or foam fire
extinguisher (fire class AB)
For electrical fires: Carbon dioxide (CO
fire extinguisher (fire class B)
Special safety requirements for
people with medical implants
Every power tool creates an electro-
magnetic field when used. Under certain
)
2