Safety Instructions - Meister FW360M Mode D'emploi

6 – Safety instructions
relating specifically to
the equipment
• Use the machine for its intended pur-
poses only.
• When the machine is in operation,
grasp it with both hands and take a
firm stance.
• Power sockets for use out of doors
must be fitted with residual-current
circuit breaker.
• Never remove chippings or debris
when the machine is running.
• Be sure to remove the power plug
before starting to work on the machine,
during any work breaks or when the
machine is not in use.
• Always keep the power cable well
away from the drilling zone.
• Make sure the machine is turned OFF
before plugging it into the power sup-
ply.
• Do not use the appliance in the rain or
wet.
• Wear safety glasses! Risk of injury
from split off or flying material parts.
• Secure the workpiece. A workpiece
held with a clamping fixture or a
vice is more securely held than
with your hand, and you have both
hands free to guide the machine
securely.
• Do not work on damp materials, e.g.
wallpaper or damp areas.
• Do not use liquids containing solvent
to dampen the surfaces to be worked
5410360-Multifunktionswerkzeug-man.indd 43 5410360-Multifunktionswerkzeug-man.indd 43
on. The heat generated while working
may generate toxic vapours.
• Never machine material containing
asbestos!
• Keep appliance and tools away from
children.
• Do not allow persons under 16 years
of age to use the machine.
• Observe general safety instructions for
handling power tools!
• H old the tool by the insulated handle
surfaces when carrying out tasks dur-
ing which it is possible that the tools
will come across hidden power cables
or its own cable. Contact with a pow-
er-carrying cable can also put metal
parts of the unit under power and
cause an electric shock.
• O nly use the electrical tool for dry
sanding. Water entering into an elec-
trical device will increase the risk of an
electrical shock.
• K eep your hands away from the saw-
ing area. Never reach under the work
piece. Contact with the saw blade
may cause injury.
• U se suitable detectors to locate hidden
supply lines or consult the local supply
company. Contact with electrical
power lines may lead to fire and elec-
trical shocks. Damaging a gas pipe
may cause an explosion. Damaging a
water pipe will cause property damage
and may cause an electric shock.
• K eep your work place clean. Mixed
materials are particularly dangerous.
Light metal dust may burn or explode.
43
20.11.20 14:13 20.11.20 14:13