Safety Instructions Relating Specifically To The Equipment - Meister EH600M Traduction Du Manuel D'utilisation Original

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30
certain circumstances, influence active
or passive medical implants. In order to
reduce the risk of serious or deadly inju­
ries, we recommend persons with such
a medical implant to consult their doctor
and the manufacturer of the medical
implant before using the power tool.
6 – Safety instructions
relating specifically to
the equipment
• Use only sharp, undamaged blades!
• Do not use blades of high­speed
steel!
• Use only blades which are permitted
for the specified speed!
• The electric planer must always be
started first before it is applied to the
workpiece!
• When planing, ensure that the planer
sole is resting squarely on the surface!
• When planing, feed the planer care­
fully and evenly. Forcing the feed rate
may lead to accidents and premature
wear to the blade!
• Empty collecting bag for shavings
regularly. A blocked shavings ejector
pipe may cause heat to build up!
• Do not put the planer down until the
motor has come to a dead stop.
• Do not fasten the electric planer to a
jig or fixture. It is not intended for sta­
tionary use!
• Wait until the blade shaft has come to
a standstill before putting the power
tool down. An openly resting and
MW-5410020-Bedien-2006.indd 49
MW-5410020-Bedien-2006.indd 49
rotating blade shaft may catch on the
surface and result in a loss of control
as well as serious injuries.
• Only hold the power tool by the insu­
lated handles since the blade shaft
is capable of cutting its own power
cable. Contact with a power­carrying
cable may also put metal parts of the
unit under power and cause an elec­
tric shock.
• Affix and secure the work piece to a
stable surface using clamps or anoth­
er suitable method. If you hold the
work piece with your hand only or up
against your body, it will be unstable
which may lead to a loss of control.
• Wear a dust protection mask when
using the device.
Safety marking
The symbols on the housing mean the
following:
Do not dispose of with
domestic waste!
Important! Observe operat­
ing instructions!
Always protect eyes and
ears.
„Tested Safety" voluntary
quality mark
CE Mark (conformity to
European safety standards)
Housing is double insulated
Always work with a dust col­
lection system connected!
49
20.05.20 12:22
20.05.20 12:22

Publicité

Table des Matières
loading

Table des Matières