Safety Instructions Relating Specifically To The Equipment - Meister HP1500M Traduction Du Manuel D'utilisation Original

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
g Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of
the power tool for operations different
from those intended could result in a
hazardous situation.
5 Service
a Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This
will ensure that the safety of the
power tool is maintained.
b To avoid hazards, damaged power
leads must be replaced by the
manufacturer or his customer service
representative.
5 – Safety instructions relat­
ing specifically to the
equipment
• Make sure that the switch is in the
0 position before putting the plug in
the socket.
• The nozzle gets very hot. Always wear
gloves and safety glasses.
• Never use the hot­air gun as a hair drier.
• Never direct the hot­air flow at people
or animals.
• Do not use the hot­air gun near easily
flammable materials or gases.
• Never obstruct the hot­air flow.
• To cool the hot­air gun, always place
it in an upright position (fig. 2) or hang
it up by the bracket provided.
30
5410520-Heissluftgeblaese_man.indd 30
5410520-Heissluftgeblaese_man.indd 30
• Never use the hot­air gun in a wet
environment or in areas with a high
degree of humidity (e.g. bathrooms,
saunas etc.).
• When the hot­air gun is being used in
a standing position, make sure that it
stands on a firm, dustfree surface.
• Vapours can be generated when hot­
air is used. Always make sure the
working area is well ventilated.
• To avoid hazards, damaged power
leads must be replaced by the manu­
facturer or his customer service rep­
resentative.
CAUTION! This tool must be
placed on its stand when it is not
in use. Fire may occur if the air device
is not treated carefully.
• Be careful when using the devices in
the vicinity of flammable materials.
• Do not direct onto one and the same
position for a longer period of time.
• Do not use in an atmosphere prone to
explosion.
• Warmth may be transferred to flam­
mable materials that are covered.
• Never leave the device unattended
when it is in operation.
The symbols on the housing have the
following meanings:
Important! Observe the
operating instructions!
Housing is double insulated.
17.07.20 07:00
17.07.20 07:00

Publicité

Table des Matières
loading

Table des Matières